Product Description
Specialist rust convertor & primer
Dinitrol RC 900 actively converts rust on substrates into a stable organic iron complex. Once the product is dry, an impermeable barrier against further corrosion is formed. Dinitrol RC 900 penetrates rust 7 to 10 times deeper than standard rust converters. The product forms a strong dry adhesive film that provides a suitable base for paintwork and other corrosion protection products. (1 x 400ml aerosol can supplied or 12 if the full box is purchased)
Remove rust, grease and dirt with a wire brush, sand paper or a sandblasting process. Rust and scale may only be visible as slight shading. In addition to rust, the steel must also be free from dust and grease. Carefully clean with acetone or lacquer thinner. Shake the spray can well. The product should be applied in several successive coats, at a distance of approx. 25 cm. The metal temperature should not be below 10°C. The material is dust-dry after one hour; if necessary, a further coat can be applied.
DINITROL RC 900 has been developed for use on oxidised iron parts.
DINITROL RC 900 forms a dry and strong adhesive film which is suitable as a base for paintwork and other corrosion protection products.
- Colour: amber-coloured solution
- Film type: hard
- Density: 0.9 g/cm³
- Viscosity: ~ 118 cm centistokes
- Solids: 16%
- Empfohlene Schichtstärke: 130 µm
- Yield: ~ 60 g/m² per coat
- Drying time: 24 hours at 20°C
- Storage time: 18 months (between 15°C and 25°C)
Product Code - DA1998
