Product Description
Click Here For Fitting Instructions
Terrafirma Hydraulic bump stops require a serious mounting kit. To withstand the punishment associated with hammering over bumps and jumps considerable work has been involved in the production of these mounting kits. Designed as a bolt on kit to fit 90/110/130/D1 and RRCs with few modifications. Included in the bump stop mounting kits are spacers to allow the compression movement to be restricted to avoid the shock bottoming out or for the bump stop to contact sooner depending on your chosen set up. The front kit operates in front of the front shock tower and utilises mostly original fixings with some drilling required. The rear kit mounts within the rear coil spring and also acts as a relocation device for the spring and the lower contact pad incorporates a spring retainer. Hydraulic bump stop mounting kits are also available for the front and rear of the Discovery 2, again designed to be a bolt on kit with minimal modification, the D2 kits use 2” travel adjustable threaded bump stops and allow for a much more aggressive high speed approach to off-roading. For those custom vehicle builders out there, that like to make their own hardware we offer bump stop tubes designed to take the Terrafirma 4” travel hydraulic bump stop that can be welded directly into chassis fabrication or to any suitable bracketry.
Fits -
- Defender
- Discovery 1
- Range Rover Classic
Product Code - TF542
